Thermodynamic Properties and Thermodynamic Geometries of Black p-Branes

The heat capacity and the electric capacitance of the black p-branes(BPB) are generally defined,then they are calculated for some special processes.It is found that the Ruppeiner thermodynamic geometry of BPB is flat.Finally,we give some discussions for the flatness of the Ruppeiner thermodynamic geometry of BPB and some black holes.     

Evolving Horava cosmological horizons

Several sets of radially propagating null congruence generators are exploited in order to form 3-dimensional marginally trapped surfaces, referred to as black hole and cosmological apparent horizons in a Ho?ava universe. Based on this method, we deal with the characteristics of the 2-dimensional space-like spheres of symmetry and the peculiarities of having trapping horizons. Moreover, we apply this method in standard expanding and contracting FLRW cosmological models of a Ho?ava universe to investigate the conditions under which the extra parameters of the theory may lead to trapped/anti-trapped surfaces both in the future and in the past. We also include the cases of negative time, referred to as the finite past, and discuss the formation of anti-trapped surfaces inside the cosmological apparent horizons.     

Quasinormal modes of BTZ black hole and Hawking‐like radiation in graphene

The Bañados‐Teitelboim‐Zanelli (BTZ) black hole model corresponds to a solution of (2+1)‐dimensional Einstein gravity with negative cosmological constant, and by a conformal rescaling its metric can be mapped onto the hyperbolic pseudosphere surface (Beltrami trumpet) with negative curvature. Beltrami trumpet shaped graphene sheets have been predicted to emit Hawking radiation that is experimentally detectable by a scanning tunnelling microscope. Here, for the first time we present an analytical algorithm that allows variational solutions to the Dirac Hamiltonian of graphene pseudoparticles in BTZ black hole gravitational field by using an approach based on the formalism of pseudo‐Hermitian Hamiltonians within a discrete‐basis‐set method. We show that our model not only reproduces the exact results for the real part of quasinormal mode frequencies of (2+1)‐dimensional spinless BTZ black hole, but also provides analytical results for the real part of quasinormal modes of spinning BTZ black hole, and also offers some predictions for the observable effects with a view to gravity‐like phenomena in a curved graphene sheet.

     

Nonlinear Electrodynamics and Magnetic Black Holes

A model of nonlinear electrodynamics with two parameters, coupled with general relativity, is investigated. We study the magnetized black hole and obtain solutions. The asymptotic of the metric and mass functions at and , and corrections to the Reissner‐Nordström solution are found. We investigate thermodynamics of black holes and calculate the Hawking temperature and heat capacity of black holes. It is shown that there are phase transitions and at some parameters of the model black holes are stable.     

Quantum Kinetic Theory of a Massless Scalar Model in the Presence of a Schwarzschild Black Hole

We employ quantum kinetic theory to investigate local quantum physics in the background of spherically symmetric and neutral black holes formed through the gravitational collapse. For this purpose in mind, we derive and study the covariant Wigner distribution function near to and far away from the black‐hole horizon. We find that the local density of the particle number is negative in the near‐horizon region, while the entropy density is imaginary. These pose a question whether kinetic theory is applicable in the near‐horizon region. We elaborate on that and propose a possible interpretation of how this result might nevertheless be self‐consistently understood.     

Stationary D = 4 black holes in supergravity: The issue of real nilpotent orbits

The complete classification of the nilpotent orbits of SO(2,2)² in the representation (2,2,2,2) , achieved in 14 , is applied to the study of multi‐center, asymptotically flat, extremal black hole solutions to the STU model. These real orbits provide an intrinsic characterization of regular single‐center solutions, which is invariant with respect to the action of the global symmetry group SO(4,4), underlying the stationary solutions of the model, and provide stringent regularity constraints on multi‐centered solutions. The known almost‐BPS and composite non‐BPS solutions are revisited in this setting. We systematically provide, for the relevant SO(2,2)²‐nilpotent orbits of the global Noether charge matrix, regular representatives thereof. This analysis unveils a composition law of the orbits according to which those containing regular multi‐centered solutions can be obtained as combinations of specific single‐center orbits defining the constituent black holes. Some of the SO(2,2)²‐orbits of the total Noether charge matrix are characterized as “intrinsically singular” in that they cannot contain any regular solution.     

Variation of the Payne Effect in Natural Rubber Reinforced by Graft-Modified Carbon Black

Carbon black (CB) was modified by liquid grafting and used for natural rubber (NR) reinforcement. Payne effects during NR reinforcement by the graft-modified carbon black (GCB) were analyzed in this paper. The results showed a proportional relationship between filler content and the Payne effect. Rubber compounds with GCB presented weaker Payne effects than their non-modified counterparts. Qualitative analysis of the correlation between filler network structure and filler content was conducted according to the relationship between bound rubber of a rubber compound and shear modulus. The impact of the storage period on the Payne effect was further studied, and the results demonstrated that the longer the storage period of the rubber compound, the stronger the Payne effect tended to be. The mechanisms by which the Payne effects were manifested differed according to the content of the filler in the rubber.     

水岩化学作用对黑色页岩的化学损伤及力学劣化试验研究

为模拟黑色页岩化学风化中酸性水-页岩化学作用过程,本文对其进行氧化条件下的不同pH值H2SO4溶液的非平衡流动态腐蚀性试验,获得了黑色页岩化学腐蚀前后矿物变化、相对质量损失、次生孔隙率、纵波波速变化及微观结构特征的变化。通过单轴压缩试验,获得黑色页岩在不同浸泡时段的变形和强度特性规律,探讨了酸性水对黑色页岩化学作用的化学损伤和力学劣化的腐蚀效应及机制。研究表明,页岩试件在化学腐蚀后,易溶性矿物成分减小,黏土矿物增加,同时矿物胶结变得松散,矿物边缘变得模糊;页岩试件的相对质量损失与次生孔隙率随pH值减小和浸泡时间的增长而增大,而纵波波速则减小;其力学特性有从脆性破坏向延性破坏转化的趋势,单轴抗压强度和弹性模量有随pH值减小和浸泡时间的增长而减小的趋势。基于次生孔隙率,构建化学损伤变量来描述试件化学-力学损伤演化过程。分析酸性水-页岩化学作用的机理主要为:溶解作用、氧化作用、水解作用及离子交换吸附作用。     

祁门红茶加工中氨基酸和儿茶素快速检测模型建立

氨基酸与儿茶素是茶叶品质的重要组成成分。祁门红茶在加工过程中,氨基酸与儿茶素含量发生了显著的变化,而且不同加工阶段差异性很大,但目前在生产中缺乏快速在线检测方法。为了实现对祁门红茶加工过程中氨基酸和儿茶素含量快速测定,试验以鲜叶、萎凋叶、揉捻叶、发酵叶和干燥后毛茶为原料,获取近红外光谱并利用化学方法检测氨基酸和儿茶素含量。对采集的原始光谱进行标准正态变量变换(SNVT)预处理,利用联合区间偏最小二乘回归法(Si-PLS)构建氨基酸和儿茶素含量近红外回归模型,相关系数与交互验证均方根误差作为评价模型的有效指标。结果表明,利用Si-PLS方法建立氨基酸含量的模型最优组合包含20个光谱区间并联合4个子区间和9个主成分因子,校正集的相关系数、校正均方根误差分别为0.955 8和1.768;预测集的相关系数、预测均方根误差分别为0.949 5和2.16。儿茶素含量的模型最优组合包含20个光谱区间并联合3个子区间和10个主成分因子,校正集的相关系数、校正均方根误差分别为0.940 1和1.22;预测集的相关系数、预测均方根误差分别为0.938 5和1.17。所建立模型准确性较好,这为茶叶加工过程中茶叶品质的在线监控提供了理论依据。     

Effect of Initiator on the Over-Voltage Positive Temperature Coefficient of Linear Low Density Polyethylene/Carbon Black Nano Composites

The composite of linear low density polyethylene (LLDPE) with carbon black (CB) and inorganic flame retardant (aluminum hydroxide, Al(OH)₃) was prepared by melt-blending method. The effect of cross-linking on the stability of positive temperature coefficient (PTC) of composite and the elimination of negative temperature coefficient (NTC) of composite were investigated. LLDPE was chemically cross-linking with different contents of initiator (dicumyl peroxide, DCP). The cross-linking effects of composite were analyzed by gel content analysis, differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). By the effect of DCP, not only the composite appeared a high PTC intensity, but also the NTC effect of composite was eliminated. In this investigation, the optimum PTC intensity of composite reached 5.87 orders of magnitude for the composition of LLD0.l0C33.7A28, and the PTC transitional temperature of composite decreased with increasing of DCP content. In addition, the good reproducibility of composites was proved by thermal cycling, and successfully passed the test of over-voltage resistance.